Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
It is possible to run rpitc 3.112 on the new raspberry pi 3 B +
20-09-2018, 08:37 AM,
#14
RE: It is possible to run rpitc 3.112 on the new raspberry pi 3 B +
(23-08-2018, 12:08 PM)Alec Kempendorf Wrote: After i ran
sudo apt-get update
sudo apt-get install rpi-update
sudo rpi-update
sudo reboot
i couldn't see any existing ethernet-adapter on my 3B+.

Finally i got it working with this:

edit this file: '/lib/udev/rules.d/73-usb-net-by-mac.rules'
where it says: 'IMPORT{builtin}="net_id", NAME="$env{ID_NET_NAME_MAC}"'
you change it to: 'IMPORT{builtin}="net_id", NAME="eth0"'

I found it here: https://www.freedesktop.org/wiki/Softwar...faceNames/

Unfortunately i didn't get the 300+ Mbit/s running yet.

Thank you Alec. I tried your way and it worked. However not for the first time. You should edit the 73-usb-net-by-mac.rules file before putting the sdcard into B+. Otherwise, it did not work in my case.

In the second attempt, I edited the file right after updating the firmware in the Pi 3B. Then rebooted Pi 3B and transferred the card into B+. It is working good now. However, I do not see any connection at the "Network Settings" tool and I couldn't start wifi either.
Reply


Messages In This Thread
RE: It is possible to run rpitc 3.112 on the new raspberry pi 3 B + - by Hakan Ozkara - 20-09-2018, 08:37 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)