Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pi3 - Lan, Wlan priority
24-03-2017, 12:59 PM,
Pi3 - Lan, Wlan priority

In RPiTC-Builder I enabled intigrated Wireless. The idea is to have (primary) connection via LAN and if LAN is not available, Wlan should be used as an alternative connection.

Currently, both network cards are up and connected to my router with two (2) IP addresses. But I want to have only one IP address.
If LAN in connected, then only LAN IP address should be used, if LAN is disconnected (!!!), then (and only then) Wlan should be active.

How can I define priority for lan and Wlan?
12-04-2017, 10:31 AM,
RE: Pi3 - Lan, Wlan priority

this is not a common case especially for RPiTC and there are several ways to do this.
Maybe this is what you are looking for.

Please write your feedback if this was working.

regards dawast
-= Feel Free to use the Search function in the upper right corner =-

Forum Jump:

Users browsing this thread: 1 Guest(s)