ARMTC Forum

Full Version: Modifying desktop widgets!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
From the start i want to thank you for this greatest project for Raspberry Pi Heart Rolleyes
Also i need some help in modifying desktop widget by adding temperature indicator and network load. I found that you have been used Conky but I do not have enough experience to modify it alone. So I ask your help! Please help me Wink
Conky is a powerful tool but he need some tweak and coding to use Smile
For the network load you can add this:
${color CC9900}NETWORK (${addr eth0}) ${hr 2}$color
Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth1} k/s
${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth1 25,140 000000 00ff00}$color
Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0}
Inbound: ${tcp_portmon 1 32767 count} Outbound: ${tcp_portmon 32768 61000 count}${alignr}Total: ${tcp_portmon 1 65535 count}
taken from here:
http://mylinuxramblings.wordpress.com/20...m-monitor/

Please note: Conky use lot of cpu, if you add something remove all the useless stuff. Also it is very formatting/linewrap sensible, pay attention! Smile