ARMTC Forum

Full Version: Sysinfo
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
I do not see the IP and Mac address. in the new sysinfo on the screen
Where , how can we customize this info
best regards
Hi Geert Vandenbroucke,
probably you have a bad network configuration try this:
:~# mv /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/70-persistent-net.rules.old
after this command edit your /etc/network/interfaces and then execute:
:~# /etc/init.d/networking restart
yes, my default Conky script take only wlan0 and eth0 IP/MAC infos, if for some reason you have (intentionally or not) renamed the eth0 or you use another network adapter you will not see any info on screen.
Config script is in /home/rpitc/.conkyrc