Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Video Memory or Raspi-config
01-04-2014, 09:36 AM,
Video Memory or Raspi-config
Hi there!
I've installed Raspberry Pi Thin Client.
Then I connected to Windows 7 PC.
But it looks slow and unsmooth.
I notice that RAM section on desktop shows 440MB.
That means video memory is allocated about 64MB, I think.

When I use "Raspbian", I could chenge video memory with raspi-config command.

How can I use raspi-config on Raspberry pi thin client?

Please help me.

Thank you.

13-05-2014, 11:13 AM,
RE: Video Memory or Raspi-config
I think you can use it, i don't know how Smile
if zou want to change some parameters like the memory allocation you have to change the config.txt file in the boot partition. Here the official manual with all the parameters you can change: (under the section Memory)
22-05-2014, 10:25 PM,
RE: Video Memory or Raspi-config
In previous versions of rpitc I used the following to install raspi-config:

using sudo:

echo "deb wheezy main" >> /etc/apt/sources.list
apt-key add raspberrypi.gpg.key
apt-get update
apt-get install raspi-config

But I've noticed that the latest version of rpitc went from Jessie to Sid now so I don't know how these instructions will work. Give these a try and let us know if that works for you.

Forum Jump:

Users browsing this thread: 1 Guest(s)